Creating the 3D Template Problem -- CFD Online Discussion Forums

March 7, 2017, 05:21	Creating the 3D Template Problem	#1
Vaticannose New Member Join Date: Mar 2015 Posts: 1 Rep Power: 0	i got a problem when doing "Chapter 4 MESHING WITH THE TRIMMING METHOD " "Creating the 3D Template " the last step i got a problem , i can not create the template. Reading the valve lift file "vlift01.dat". Reading the valve lift file "vlift02.dat". Finished reading from the file "E:\starcd_practice\xes-i6iTcNc". Creating template. Finding connectivity for 1743 vertices. Finding local structure. Finished setting up elliptic smoother for 1595 vertices. 41971 vertices were moved for 69 iterations. 38399 vertices were moved for 36 iterations. Sorting 1676 faces. Sorting 462576 faces. Sorting 462576 faces. Save completed to the file "save_ice_tut". Finished. Failed to create the template.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem with creating artery thickness for FSI methode using fluent and mechanical	raminostadi	FLUENT	1	June 6, 2020 05:17
[DesignModeler] Problem with creating thickness	raminostadi	ANSYS Meshing & Geometry	1	February 12, 2017 10:21
[ICEM] Problem creating prisms in baffle surface	thernandez	ANSYS Meshing & Geometry	0	July 26, 2016 06:55
[ANSYS Meshing] Problem creating two surfaces from two identical curves	KingKraut	ANSYS Meshing & Geometry	1	November 27, 2015 02:00
[ICEM] Problem in creating different zones in ICEM-CFD	samurai_01	ANSYS Meshing & Geometry	2	November 28, 2012 12:41

All times are GMT -4. The time now is 11:44.