Error for inputing mesh file from ICEM CFD to StarCD

chriszhou · August 31, 2009, 06:43

Hey, guys
I have a urgent problem. I try to input mesh file from ICEM (11.0) to StarCD(4.06). Exported files from ICEM include .vrt, .inp, .cel. But when I select import Grid (fromat ICEM) in starCD, it shows no cells!! And I can't display geometry or cells.

Did sobody have this problem and solve it already? Thank you so much to tell me how to handle it! Or you can sent me mail for suggestions. chriszsyjy@gmail.com

chriszhou · August 31, 2009, 06:56

Luckly, I found how to do that. You only need to put all the files into default working folder, not your own one. That's OK!

nottoforget · December 4, 2009, 14:48

It may sound as a stupid question, but I don't know where is the default working directory. Please tell me how can I find it?

kim100 · December 7, 2009, 06:53

when you run your CD，the default working dictionary will appear like this style ：C:/Documents and Settings/Administrator/， and you can also change the button "SET WORKING Dictionary" as you like！

nottoforget · December 7, 2009, 13:00

Thank you. But I still can't find it because when I launched Starcd I changed the working directory and forgot what was the default one.

Anyway, I'm not realy sure that if I even find the default working directory it will help me to import grids from ICEM to starcd4.08.

Does anybody know how to do it step by step? Or maybe you can check my actions:
1. In Icem - Output - Select solver - output solver - STAR-4, common structural solver - ANSYS.
2. Output - Write input. Then in some folder appears 4 new files, among them there is star.inp
3. In Star-cd - Grids-Import grid- format -ICEM, input file - star.inp - apply.
4. As I understand starcd reads the file star.inp - because it shows the number of cells and other options - BUT - it doesn't show the grid itself in the black window!!

I don't know what to do with it so please write if you have any ideas.

JBeilke · December 7, 2009, 16:28

simply type the command "ifile star.inp" in prostar

kim100 · December 7, 2009, 23:57

You are welcome! I will show you an example path about ICEM+CD,and you can check yourself; the method does not changed； Let me know your mail address I will send you later！

Inter-communicate is a good way to improve study for both of us！

nottoforget · December 8, 2009, 15:05

To beilke: thank you, i tried typing the command but certanly result is the same - all the information about the grid is written, but no graphic view of it((

To kim100:thank you too I've sent you my mail and 'm waiting for a letter now

JBeilke · December 8, 2009, 15:26

Quote:

Originally Posted by nottoforget

To beilke: thank you, i tried typing the command but certanly result is the same - all the information about the grid is written, but no graphic view of it((

so what the hell is prostar telling you in the output window? what means "no graphics view..."?

nottoforget · December 9, 2009, 16:34

I got it now

with help of kim100. He sent me a little manual about importing mesh) Thanks!
In fact I understood that the only problem is just me not knowing how to work with starcd and it's everything ok about the mesh.

wmsyahid · January 15, 2010, 03:12

hi nottoforget,

i also new as CD-adapco user. Previously used MSC program. do you mind if you can help me for some manual you have for this star-cd...

thanks in advance...

August 31, 2009, 06:43	Error for inputing mesh file from ICEM CFD to StarCD	#1
chriszhou New Member ZHOU Sheng Join Date: Jul 2009 Posts: 4 Rep Power: 16	Hey, guys I have a urgent problem. I try to input mesh file from ICEM (11.0) to StarCD(4.06). Exported files from ICEM include .vrt, .inp, .cel. But when I select import Grid (fromat ICEM) in starCD, it shows no cells!! And I can't display geometry or cells. Did sobody have this problem and solve it already? Thank you so much to tell me how to handle it! Or you can sent me mail for suggestions. chriszsyjy@gmail.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11
ICEM CFD to CFX geometry and mesh	Luca	CFX	6	February 4, 2010 16:31
Gambit mesh file import into ICEM CFD	dev....	FLUENT	2	January 29, 2009 10:37
ParaView Compilation	jakaranda	OpenFOAM Installation	3	October 27, 2008 11:46
How to corse mesh in icem cfd?	Priety	CFX	2	October 2, 2006 03:57

August 31, 2009, 06:56		#2
chriszhou New Member ZHOU Sheng Join Date: Jul 2009 Posts: 4 Rep Power: 16	Luckly, I found how to do that. You only need to put all the files into default working folder, not your own one. That's OK!

December 4, 2009, 14:48		#3
nottoforget New Member girl Join Date: Jul 2009 Location: Russia Posts: 11 Rep Power: 16	It may sound as a stupid question, but I don't know where is the default working directory. Please tell me how can I find it?

December 7, 2009, 06:53		#4
kim100 New Member Feng Jiang Join Date: Dec 2009 Posts: 3 Rep Power: 16	when you run your CD，the default working dictionary will appear like this style ：C:/Documents and Settings/Administrator/， and you can also change the button "SET WORKING Dictionary" as you like！

December 7, 2009, 13:00		#5
nottoforget New Member girl Join Date: Jul 2009 Location: Russia Posts: 11 Rep Power: 16	Thank you. But I still can't find it because when I launched Starcd I changed the working directory and forgot what was the default one. Anyway, I'm not realy sure that if I even find the default working directory it will help me to import grids from ICEM to starcd4.08. Does anybody know how to do it step by step? Or maybe you can check my actions: 1. In Icem - Output - Select solver - output solver - STAR-4, common structural solver - ANSYS. 2. Output - Write input. Then in some folder appears 4 new files, among them there is star.inp 3. In Star-cd - Grids-Import grid- format -ICEM, input file - star.inp - apply. 4. As I understand starcd reads the file star.inp - because it shows the number of cells and other options - BUT - it doesn't show the grid itself in the black window!! I don't know what to do with it so please write if you have any ideas.

December 7, 2009, 16:28		#6
JBeilke Senior Member Joern Beilke Join Date: Mar 2009 Location: Dresden Posts: 498 Rep Power: 20	simply type the command "ifile star.inp" in prostar

December 7, 2009, 23:57		#7
kim100 New Member Feng Jiang Join Date: Dec 2009 Posts: 3 Rep Power: 16	You are welcome! I will show you an example path about ICEM+CD,and you can check yourself; the method does not changed； Let me know your mail address I will send you later！ Inter-communicate is a good way to improve study for both of us！

December 8, 2009, 15:05		#8
nottoforget New Member girl Join Date: Jul 2009 Location: Russia Posts: 11 Rep Power: 16	To beilke: thank you, i tried typing the command but certanly result is the same - all the information about the grid is written, but no graphic view of it(( To kim100:thank you too I've sent you my mail and 'm waiting for a letter now

December 9, 2009, 16:34		#10
nottoforget New Member girl Join Date: Jul 2009 Location: Russia Posts: 11 Rep Power: 16	I got it now with help of kim100. He sent me a little manual about importing mesh) Thanks! In fact I understood that the only problem is just me not knowing how to work with starcd and it's everything ok about the mesh.

January 15, 2010, 03:12		#11
wmsyahid New Member Wan Mohd Syahid Join Date: Jan 2010 Posts: 1 Rep Power: 0	hi nottoforget, i also new as CD-adapco user. Previously used MSC program. do you mind if you can help me for some manual you have for this star-cd... thanks in advance...