 |
 |
 |
|
|
|
[Sponsors] | ||||
February 19, 2010, 06:35
|
MRF model in Star CD
|
#1 |
|
New Member
Ashish Kumar Gupta
Join Date: Feb 2010
Location: Bangalore
Posts: 3
Rep Power: 16  |
There are two approach to model multiple reference frame in StarCD viz. explicit and implicit approach. While the explicit approach can be modelled as one to one connection (no averaging of flow variables) as well as by averaging the flow variables at the interface. But when the problem is modelled using implicit MRF approach, whether the flow variables at the interface are averaged or one to one connection is assumed. Could someone elaborate on this?
Thanks in advance ... Ashish |
|
|
|
|
|
February 25, 2010, 09:43
|
|
#2 |
|
Senior Member
Joern Beilke
Join Date: Mar 2009
Location: Dresden
Posts: 498
Rep Power: 20 |
||
|
|
|
|
|
February 25, 2010, 23:37
|
Ashish Gupta
|
#3 |
|
New Member
Ashish Kumar Gupta
Join Date: Feb 2010
Location: Bangalore
Posts: 3
Rep Power: 16 |
Hi Bielke
Thanks for the linkd provided by you. They were really useful. Regds Ashish |
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
| [Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
| anyone used star ccm+ to model rivers | R2DM | Siemens | 1 | July 27, 2009 04:55 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
| algebraic slip model with stirred suspension? | Manuel Krause | CFX | 0 | April 15, 2005 09:10 |
Linear Mode
