 |
 |
 |
|
|
|
[Sponsors] | ||||
June 15, 2011, 03:13
|
Parametric Simulations in STAR-CD
|
#1 |
|
New Member
Syed Murtuza Mehdi
Join Date: Apr 2011
Posts: 19
Rep Power: 15  |
Hi All,
Is there any way (like parametric solver facility in COMSOL) through which we can generate solution from the result of one single simulation for new values of a particular design parameter. Thanks |
|
|
|
|
|
September 8, 2011, 09:31
|
|
#2 |
|
Senior Member
Aroon
Join Date: Apr 2009
Location: Racine WI
Posts: 148
Rep Power: 17 |
Sorry about the late response to this older post.
Do you use STAR CCM+? STAR CCM+ can be easily tuned to run several parametric studies, using macros that can be recorded. This is more user-friendly than STAR CD for parametric studies. |
|
|
|
|
|
|
September 8, 2011, 10:37
|
|
#3 |
|
Senior Member
Aroon
Join Date: Apr 2009
Location: Racine WI
Posts: 148
Rep Power: 17 |
Sorry about the late response to this older post.
Do you use STAR CCM+? STAR CCM+ can be easily tuned to run several parametric studies, using macros that can be recorded. This is more user-friendly than STAR CD for parametric studies. |
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
| [Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
| error in star ccm | maurizio | Siemens | 3 | October 16, 2007 05:17 |
| [Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |
| URANS and Transient Simulations | bob | Main CFD Forum | 0 | October 1, 2003 03:54 |
Linear Mode
