Pressure difference after adding injectors in Prostar

aziz56 · December 15, 2011, 07:35

Hi
I need ur help
i have simulated a moving chamber with it valves , using prostar
after i simulate i have good pressure values (maximum pressure at tdc =45bar) after changing it to lagrangian multiphase and adding the injectors i have a pressure difference of 13bar at the same point do any one knows why ??

(fuel ration have been added in prostar option spraywithatomazation all the other options have been add in prostar )
do you have idea why there is a big difference betwwen the two simulations

thxs alot
aziz

Subash Chandar Kumar · May 3, 2018, 05:19

How to move piston and valves in prostar, it shows cell deactivation error every time i try to deactivate cell using events file. Is there any procedure before deactivating a cell like moving grid commands or detaching the cell from the simulation. It would be very helpful if you point my errors.

Thank you.....
Subash

AbhiAc · August 3, 2018, 16:40

@Subash why are you trying this in prostar? Do you have access to es-ice?

Subash Chandar Kumar · August 5, 2018, 13:16

I have access to es-ice but I wanna know how to create a geometry and mesh it in prostar and also give event files to moving piston inside a cylinder.

AbhiAc · August 5, 2018, 13:42

Hi Subash, get in touch with your support engineers. They should be able to help you out.

December 15, 2011, 07:35	Pressure difference after adding injectors in Prostar	#1
aziz56 New Member Join Date: Mar 2011 Posts: 11 Rep Power: 15	Hi I need ur help i have simulated a moving chamber with it valves , using prostar after i simulate i have good pressure values (maximum pressure at tdc =45bar) after changing it to lagrangian multiphase and adding the injectors i have a pressure difference of 13bar at the same point do any one knows why ?? (fuel ration have been added in prostar option spraywithatomazation all the other options have been add in prostar ) do you have idea why there is a big difference betwwen the two simulations thxs alot aziz

May 3, 2018, 05:19	moving mesh	#2
Subash Chandar Kumar New Member subash Join Date: Jul 2017 Posts: 3 Rep Power: 8	How to move piston and valves in prostar, it shows cell deactivation error every time i try to deactivate cell using events file. Is there any procedure before deactivating a cell like moving grid commands or detaching the cell from the simulation. It would be very helpful if you point my errors. Thank you..... Subash

August 5, 2018, 13:16	About Prostar	#4
Subash Chandar Kumar New Member subash Join Date: Jul 2017 Posts: 3 Rep Power: 8	I have access to es-ice but I wanna know how to create a geometry and mesh it in prostar and also give event files to moving piston inside a cylinder.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to read pressure at discrete points	paka	OpenFOAM	16	April 28, 2020 07:26
Pressure Rise Error	emueller	CFX	0	May 5, 2009 11:08
Difference in pressure drop results	To all fluent users need help pls	FLUENT	4	May 30, 2007 04:31
Difference in pressure drop results	al-jasim	FLUENT	0	May 28, 2007 09:54
Hydrostatic pressure in 2-phase flow modeling (long)	DS & HB	Main CFD Forum	0	January 8, 2000 15:00

August 3, 2018, 16:40		#3
AbhiAc New Member Join Date: Aug 2018 Posts: 4 Rep Power: 7	@Subash why are you trying this in prostar? Do you have access to es-ice?

August 5, 2018, 13:42		#5
AbhiAc New Member Join Date: Aug 2018 Posts: 4 Rep Power: 7	Hi Subash, get in touch with your support engineers. They should be able to help you out.