CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Structural Mechanics

importing Mechanical Apdl model into Workbench

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 12, 2016, 04:04
Default importing Mechanical Apdl model into Workbench
  #1
New Member
 
Sammi khan
Join Date: May 2016
Posts: 6
Rep Power: 9
Sam Khan is on a distinguished road
hi, I want to import only the geometry created in mechanical apdl into ansys workbench so that it can be meshed in workbench. Also if there are any changes in geometry, it can be done in workbench.
Sam Khan is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing SolidWorks Model DIRECTLY into openfoam bgood44 OpenFOAM 9 January 20, 2020 07:47
Wrong flow in ratating domain problem Sanyo CFX 17 August 15, 2015 07:20
Error when updating Mechanical APDL timtianchen Structural Mechanics 0 October 27, 2013 08:26
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
transforming axis of a already built model in ansys APDL musawar ANSYS Meshing & Geometry 0 June 28, 2011 02:32


All times are GMT -4. The time now is 21:47.