ANSYS Mechanical problem
1 Attachment(s)
after completing a proper hex dominant mesh a run a simulation but after approx. 20 min it shows error saying that 'during the simulation the elapsed time....' can anyone could help me to solve this error.
Thanks in advance |
It's not an error but just a warning. The message is quite straight forward and self-explanatory. Either you’re running your simulation on a slow hard drive or RAM related causing a “bottleneck” of performance. You can greatly speed up the simulation by using a SSD for instance; you can refer to the performance guide in the help menu.
|
Thanks a lot
|
All times are GMT -4. The time now is 15:24. |