 |
 |
 |
|
|
|
[Sponsors] | ||||
Modeling a Vehicle load moving on a simply supported bridge with one span in 3D |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 14, 2018, 03:36
|
Modeling a Vehicle load moving on a simply supported bridge with one span in 3D
|
#1 |
|
New Member
Delhi
Join Date: Jun 2018
Posts: 1
Rep Power: 0  |
I am a beginner in COMSOL multiphysics (5.3a) software and working on the above topic for understanding of software. I have made a simply supported bridge with one span of 10m and with suitable height and thickness of the same in 3D.
I want to model a vehicle(moving point loads) on this bridge, in this time dependent study.I saw the beam_subjected_to_traveling_loads file in the application builder and traveling loads on beam file and not able to investigate further for the formation of moving loads. I am not familiar with the functions in COMSOL and I need urgent guidance related to this topic. The link to the .mph file is given below https://drive.google.com/open?id=1aC...j7rnnOBncWQy3P Please reach out to me at: adityakapoor167@gmail.com |
|
|
|
|
|
| Tags |
| cosmol multiphysics, modeling, moving point loads, structural engineers, structural mechanics |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Modeling Human Load | Bhanu24 | FLUENT | 0 | May 24, 2018 00:21 |
| [mesh manipulation] refineMesh Error | mohsen.boojari | OpenFOAM Meshing & Mesh Conversion | 3 | March 1, 2018 22:07 |
| [ANSYS Meshing] load application in PSC girder bridge | astitva | ANSYS Meshing & Geometry | 0 | February 26, 2016 02:33 |
| Simulating turbulence behind a moving vehicle. | visitor | CFX | 6 | August 18, 2014 06:31 |
| moving load problem | aditi chauhan | ANSYS | 0 | October 9, 2010 04:47 |
Linear Mode
