CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Structural Mechanics

[Abaqus] Strange deformation of Eigenvalue Buckling

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 3, 2020, 13:47
Default [Abaqus] Strange deformation of Eigenvalue Buckling
  #1
New Member
 
Join Date: Apr 2020
Posts: 2
Rep Power: 0
DoubleCNg is on a distinguished road
Hello Guys,
I'm currently using Abaqus to run a simulation for Eigenvalue Buckling. The model I created was Discontinuous random oriented fibre composite, I used shell element to create a set of strands and then assembly to become combined strand and then created a solid matrix. Then, I used embedded element to combine the combined strand and composite. The buckling setup was Pin-Pin. I constraint one end with Pinned fixed, another end I defined a Multiple Point Constraint Pinned and applied a concentrated load on it (-1N).

After I ran the analysis, the result did not show a Pin-Pin buckling deformation, instead, it showed Fixed-Free buckling deformation. I had attached the image, please have a look.

I manually calculated the Pcr Theoretical Buckling Load, the load is quite similar with the Eigenvalue shown in Abaqus FEA result. I couldn't find any paper that says this issue or explanation in Abaqus Help Manual. Can anyone know what happens? Please Help Me. Thank You.

Regards,
DoubleCNg

Untitled 1.png
DoubleCNg is offline   Reply With Quote

Old   April 26, 2020, 16:33
Default
  #2
Senior Member
 
karachun's Avatar
 
Alexander Karachun
Join Date: Nov 2015
Location: Mykolaiv, Ukraine
Posts: 139
Rep Power: 6
karachun is on a distinguished road
What element type and constraints you use?
karachun is offline   Reply With Quote

Old   April 29, 2020, 00:34
Default
  #3
New Member
 
Join Date: Apr 2020
Posts: 2
Rep Power: 0
DoubleCNg is on a distinguished road
Quote:
Originally Posted by karachun View Post
What element type and constraints you use?
Hi, I used element C3D8R for the homogenous part (host) and S4R for shell part(embedded). Constraints is Pinned.
DoubleCNg is offline   Reply With Quote

Old   April 29, 2020, 02:23
Default
  #4
Senior Member
 
karachun's Avatar
 
Alexander Karachun
Join Date: Nov 2015
Location: Mykolaiv, Ukraine
Posts: 139
Rep Power: 6
karachun is on a distinguished road
If you apply pinned constraint to solid elements (C3D8R) then you actualy fix them, because you apply constraints to two rows of nodes. Try to model whole part only with plate elements.
karachun is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh deformation memory requirements aa.g SU2 5 March 24, 2020 15:34
FFD shape deformation for 3D wing not changing the mesh lwc24 SU2 Shape Design 5 August 1, 2019 15:17
Problem with ANSYS Workbench deformed shape on Eigenvalue Buckling Metallic Structural Mechanics 2 March 15, 2019 09:11
Strange bolt deformation in bolt pretension analysis sheaker ANSYS 4 May 20, 2018 10:00
Total Deformation Vs Directional Deformation in Ansys Structural rsdsaurav Structural Mechanics 0 June 20, 2015 06:03


All times are GMT -4. The time now is 16:17.