CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Structural Mechanics

With abaqus, i modeled reinforced concrte comumn, my problem is : the Load-Displaceme

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 9, 2020, 15:33
Post With abaqus, i modeled reinforced concrte comumn, my problem is : the Load-Displaceme
  #1
New Member
 
TAHAR
Join Date: Apr 2020
Posts: 1
Rep Power: 0
AMARMOHAMEDELAMINE is on a distinguished road
The attached excel file, shows the results for a column subjected to different displacements imposed at its top and supported at its base, I used the classical characteristics for concrete and steel.
I superimposed the different Displacement - Response responses I obtained,
I was expecting that the variation in reaction or force would follow the same trajectory depending on the intensity of the imposed displacement, but it turns out that this is not the case; I can't find an explanation.
In my understanding, the answer to this problem is a curve equivalent to the one experimentally obtained, whose length depends on the applied load or imposed displacement.
Attached Files
File Type: pdf Doc1.pdf (76.6 KB, 1 views)
AMARMOHAMEDELAMINE is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SU2-7.0.1 on ubuntu 18.04 hyunko SU2 Installation 7 March 16, 2020 04:37
Guide: How to ask a question on the forums jola Site Help, Feedback & Discussions 0 July 29, 2016 18:52
moving load problem aditi chauhan ANSYS 0 October 9, 2010 04:47


All times are GMT -4. The time now is 09:49.