CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Structural Mechanics

How to export mesh from AcuSolve/AcuConsole to Hypermesh/Hyperwork ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 26, 2020, 13:51
Exclamation How to export mesh from AcuSolve/AcuConsole to Hypermesh/Hyperwork ?
  #1
New Member
 
Mohamed
Join Date: Jan 2019
Posts: 21
Rep Power: 7
gaddora165 is on a distinguished road
anyone has tried to export a mesh from Acuconsole to hypermesh ?
I've built a model in AcuConsole and completed the mesh operation and I'd like to use the same mesh as input into Hypermesh.

I've managed to export the MESH.DIR but this file does not seems can be imported to hypermesh/hyperwork.

I could not manage to find any tutorials about this as well.

pls help !
gaddora165 is offline   Reply With Quote

Old   June 27, 2020, 01:41
Default
  #2
New Member
 
Mohamed
Join Date: Jan 2019
Posts: 21
Rep Power: 7
gaddora165 is on a distinguished road
I have exported ".h3d" results from AcuSolve and then imported to SimLab.
then I've exported solver deck ".fem" and then open it through hypermesh.
I have applied all constraints and forces required for the model and then I've run the simulation but I've found an error :

*** WARNING # 1284
No SPC or SUPORT1 data specified for static SUBCASE 1.
Make sure the model is constrained otherwise.

*** ERROR 13: Element, 1 is repeated in the input data.
*** ERROR 13: Element, 2 is repeated in the input data.
*** ERROR 13: Element, 3 is repeated in the input data.
*** ERROR 13: Element, 4 is repeated in the input data.
*** ERROR 13: Element, 5 is repeated in the input data.
*** ERROR 13: Element, 6 is repeated in the input data.
*** ERROR 13: Element, 7 is repeated in the input data.
*** ERROR 13: Element, 8 is repeated in the input data.
*** ERROR 13: Element, 9 is repeated in the input data.
*** ERROR 13: Element, 10 is repeated in the input data.
*** ERROR 13: Element, 11 is repeated in the input data.
*** ERROR 13: Element, 12 is repeated in the input data.
*** ERROR 13: Element, 13 is repeated in the input data.
*** ERROR 13: Element, 14 is repeated in the input data.
*** ERROR 13: Element, 15 is repeated in the input data.

*** ERROR # 1938 ***
Element has repeat IDs 77963 time(s).

is this due to wrong importing/exporting steps that I've done ?
if yes, how would this work ?
gaddora165 is offline   Reply With Quote

Old   June 27, 2020, 01:44
Default
  #3
New Member
 
Mohamed
Join Date: Jan 2019
Posts: 21
Rep Power: 7
gaddora165 is on a distinguished road
error messages from the .OUT file as per below:

*** WARNING # 1284
No SPC or SUPORT1 data specified for static SUBCASE 1.
Make sure the model is constrained otherwise.

*** ERROR 13: Element, 1 is repeated in the input data.
*** ERROR 13: Element, 2 is repeated in the input data.
*** ERROR 13: Element, 3 is repeated in the input data.
*** ERROR 13: Element, 4 is repeated in the input data.
*** ERROR 13: Element, 5 is repeated in the input data.
*** ERROR 13: Element, 6 is repeated in the input data.
*** ERROR 13: Element, 7 is repeated in the input data.
*** ERROR 13: Element, 8 is repeated in the input data.
*** ERROR 13: Element, 9 is repeated in the input data.
*** ERROR 13: Element, 10 is repeated in the input data.
*** ERROR 13: Element, 11 is repeated in the input data.
*** ERROR 13: Element, 12 is repeated in the input data.
*** ERROR 13: Element, 13 is repeated in the input data.
*** ERROR 13: Element, 14 is repeated in the input data.
*** ERROR 13: Element, 15 is repeated in the input data.

*** ERROR # 1938 ***
Element has repeat IDs 77963 time(s).
gaddora165 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 08:38
A CFX-POST error (ver 14.5.7) wangyflp88 CFX 2 July 22, 2017 01:17
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
Export 2D mesh from ICEM to Fluent BuilttoSpill ANSYS Meshing & Geometry 4 August 28, 2010 09:16
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 18:59.