|
[Sponsors] |
March 22, 2021, 16:38 |
Spring modelling
|
#1 |
New Member
Daniela
Join Date: Mar 2021
Posts: 1
Rep Power: 0 |
Dear all,
I am trying to model a plane-spring under the surface. I simulated my spring under the surfaces, I set up the Prescribed Displacement mode to the cylindrical surface, but it seems that my spring doesn't give reaction(except the contact surface between spring and displaced surface) when I put down one surface. I showed the picture of the problem. Any help is appreciated on this problem. Best regards, Daniela https://drive.google.com/drive/folde...i7?usp=sharing |
|
Tags |
#comsol |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CFD in Naval Hydrodynamics, Off-Shore and Wave Modelling with OpenFOAM | hjasak | OpenFOAM Announcements from Other Sources | 2 | February 13, 2017 04:59 |
NUMAP-FOAM Spring 2016 | hjasak | OpenFOAM Announcements from Other Sources | 4 | October 19, 2016 10:36 |
SixDoFRigidBodyMotion under OF2.3 ( self oscillating cylinder) | Scabbard | OpenFOAM Running, Solving & CFD | 1 | July 22, 2014 04:50 |
Spring Modelling and loading | hotshotracer | ANSYS | 0 | March 23, 2013 11:59 |
modelling spring and damping | hossein2357 | FLOW-3D | 0 | November 17, 2012 20:09 |