Initiating an initial condition for a transient anaysis
5 Attachment(s)
Hello, everyone,
In a static analysis, I simulated a floating roof of a liquid gas storage tank, and the results agree with the analytical ones. Firstly, I thought I could transfer the static results to transient as its initial condition. But then I found that it is not applicable. After surfing the web, I realize I should define three steps; The two first steps generate the initial condition for the 3rd step.I turn off time integration option in step controls for the first two steps obtain an static state at the end of the second step. But now, I face some strange errors and wonder why the solution can not converge. Attachment 95395 Attachment 95396 Attachment 95397 Attachment 95398 Attachment 95399 |
Attachment
5 Attachment(s)
|
Attachment
5 Attachment(s)
|
Attachment
5 Attachment(s)
|
Error
4 Attachment(s)
|
All times are GMT -4. The time now is 20:57. |