Build SU2 on Intel Xeon Phi

akun646 · August 4, 2014, 04:29

Dear developers and users,

there are some possibilities for us to have access to the co-processor Intel Xeon Phi. As we are starting to use SU2, I would like to know how difficult it is to build SU2 on the co-processor Xeon Phi. Is it the same installation procedure as any multi-cores computers, by setting the path of mpicxx or mpic++? Thank you very much!!!

Facundo

jacobH · August 4, 2014, 04:50

I think you need to use Intels compiler and then you would need to change the build process a little so that it does compilation on both the host and the xeon phi. Lastly when doing mpirun you need to specify the device you want to run it on (might be able to do this using envoirment variables but not sure).

Have a look on this and good luck!

https://software.intel.com/en-us/art...cessor-systems

August 4, 2014, 04:29	Build SU2 on Intel Xeon Phi	#1
akun646 New Member Facundo Join Date: Jun 2012 Posts: 22 Rep Power: 13	Dear developers and users, there are some possibilities for us to have access to the co-processor Intel Xeon Phi. As we are starting to use SU2, I would like to know how difficult it is to build SU2 on the co-processor Xeon Phi. Is it the same installation procedure as any multi-cores computers, by setting the path of mpicxx or mpic++? Thank you very much!!! Facundo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.org] OpenFOAM build on Intel Xeon Phi	asaijo	OpenFOAM Installation	31	July 26, 2017 10:35
OpenFOAM2.3.0 on Intel Xeon Phi with OpenMPI-1.6.5	manredd	OpenFOAM Installation	1	June 6, 2014 15:41
SU2 3.0 build failure	waku2005	SU2 Installation	4	January 24, 2014 12:40
[OpenFOAM] Color display problem to view OpenFOAM results.	Sargam05	ParaView	16	May 11, 2013 00:10
CFX11 + Fortran compiler ?	Mohan	CFX	20	March 30, 2011 18:56

August 4, 2014, 04:50		#2
jacobH New Member Join Date: Jul 2014 Posts: 9 Rep Power: 11	I think you need to use Intels compiler and then you would need to change the build process a little so that it does compilation on both the host and the xeon phi. Lastly when doing mpirun you need to specify the device you want to run it on (might be able to do this using envoirment variables but not sure). Have a look on this and good luck! https://software.intel.com/en-us/art...cessor-systems