CGNS model

Tushar K Herle · August 8, 2013, 12:44

Hi,
I have modeled a wing and i meshed it with the help of hypermesh11. I got the .cgns file of the wing but when i tried to run it using oneram6 cfg code(conversion from cgns to su2 is mentioned in the cfg code) it is showing "unrecognised element type".
I think i missed to mention something either in .cgns file or in .cfg file. Please help me out with this. It will be really helpful if anyone can tell me what nd all should be mentioned in .cgns file and how the model should be. Is there any particular method that i should follow??

Akash C · August 10, 2013, 01:23

Go through the su2 manual and find out if you have used any unsupported element type. Also post the .cfg file used for conversion if you can.

August 8, 2013, 12:44	CGNS model	#1
Tushar K Herle New Member Tushar K Herle Join Date: Jul 2013 Posts: 6 Rep Power: 12	Hi, I have modeled a wing and i meshed it with the help of hypermesh11. I got the .cgns file of the wing but when i tried to run it using oneram6 cfg code(conversion from cgns to su2 is mentioned in the cfg code) it is showing "unrecognised element type". I think i missed to mention something either in .cgns file or in .cfg file. Please help me out with this. It will be really helpful if anyone can tell me what nd all should be mentioned in .cgns file and how the model should be. Is there any particular method that i should follow??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eddy dissipation model: combustion doesn't occur	roukaia	FLUENT	2	November 18, 2020 10:23
eddy dissipation model: combustion doesn't occur	roukaia	FLUENT	0	December 24, 2011 09:10
Problems bout CFD model of biomass gasification, Downdraft gasifier	wanglong	FLUENT	2	November 25, 2009 23:27
Reynolds Stress model in CFX vs Fluent	Tim	CFX	1	October 7, 2009 06:19
Grid resolution for full-scale and down scaled model	gravis	Main CFD Forum	0	October 2, 2009 10:27

August 10, 2013, 01:23		#2
Akash C Member Akash Chaudhari Join Date: Dec 2012 Location: Pune, India Posts: 31 Rep Power: 13	Go through the su2 manual and find out if you have used any unsupported element type. Also post the .cfg file used for conversion if you can.