problem about partition setting

YoniHe · November 6, 2014, 15:13

When I tried to run the tutorial 7 with 4 cores in my computer, there is always an error interrupt the process at the very beginning, with the error information " IOError: [Errno 2] No such file or directory: '/data/hedaquanhe/tutorial7/DESIGNS/DSN_001/DECOMP/mesh_NACA0012_rot_1.su2' "

I went to the directory and found there were 2 files generated, one is "config_PRT.cfg", the other is "mesh_NACA0012_rot.su2", it is different from that filename informed by the error information with " _1" missing.

When I run it on only 1 core of my computer, it can carry out the calculation though I stopped the process after a few iterations.

Can anyone help me to cope with this problem?

zylanboluo · December 11, 2014, 04:35

I have the same problem when I try running optimization with cores more than 1.
Have you solved the problem?

gina07 · January 4, 2015, 03:28

I met the same problem. Is it that we should modify someplace in some certain script? Hope for your answers~

economon · January 4, 2015, 03:46

Hi all,

We recently updated the code so that all partitioning is completed internal to SU2_CFD, SU2_DEF, etc. This means that we no longer have SU2_PRT as a separate module that writes additional mesh files with their partition number before the .su2.

Can you please double-check your installation to make sure that you're using the latest and greatest version of SU2? It's SU2 v3.2.7 that has these new features:

https://github.com/su2code/SU2/releases/tag/v3.2.7

You might also download the latest version of the TestCases too (just in case)

https://github.com/su2code/TestCases

Hope this helps,

Thomas D. Economon
SU2 lead developer

November 6, 2014, 15:13	problem about partition setting	#1
YoniHe New Member Daquan He Join Date: Aug 2014 Posts: 7 Rep Power: 10	When I tried to run the tutorial 7 with 4 cores in my computer, there is always an error interrupt the process at the very beginning, with the error information " IOError: [Errno 2] No such file or directory: '/data/hedaquanhe/tutorial7/DESIGNS/DSN_001/DECOMP/mesh_NACA0012_rot_1.su2' " I went to the directory and found there were 2 files generated, one is "config_PRT.cfg", the other is "mesh_NACA0012_rot.su2", it is different from that filename informed by the error information with " _1" missing. When I run it on only 1 core of my computer, it can carry out the calculation though I stopped the process after a few iterations. Can anyone help me to cope with this problem?

December 11, 2014, 04:35		#2
zylanboluo New Member Ying Zhuying Join Date: Nov 2014 Posts: 8 Rep Power: 10	I have the same problem when I try running optimization with cores more than 1. Have you solved the problem? gina07 likes this.

January 4, 2015, 03:28	shape optimization.py error	#3
gina07 New Member Zhang Rui Join Date: Oct 2014 Posts: 15 Rep Power: 10	I met the same problem. Is it that we should modify someplace in some certain script? Hope for your answers~

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem setting C_MU_T with DEFINE_ADJUST	Andy	FLUENT	3	June 22, 2018 02:53
Problem setting AV	Marko	CFX	0	March 18, 2005 08:06
Problem setting C_MU_T with DEFINE_ADJUST	sarah_ron	FLUENT	1	February 24, 2005 12:11
Help setting up combustor problem	Tom	FLUENT	0	February 5, 2005 01:20
Warning 097-	AB	Siemens	6	November 15, 2004 04:41

January 4, 2015, 03:46		#4
economon Super Moderator Thomas D. Economon Join Date: Jan 2013 Location: Stanford, CA Posts: 271 Rep Power: 13	Hi all, We recently updated the code so that all partitioning is completed internal to SU2_CFD, SU2_DEF, etc. This means that we no longer have SU2_PRT as a separate module that writes additional mesh files with their partition number before the .su2. Can you please double-check your installation to make sure that you're using the latest and greatest version of SU2? It's SU2 v3.2.7 that has these new features: https://github.com/su2code/SU2/releases/tag/v3.2.7 You might also download the latest version of the TestCases too (just in case) https://github.com/su2code/TestCases Hope this helps, Thomas D. Economon SU2 lead developer