CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > SU2 > SU2 Shape Design

Using multiple Hicks Henne deformations

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree4Likes
  • 4 Post By talbring

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 10, 2015, 20:47
Default Using multiple Hicks Henne deformations
  #1
Senior Member
 
Jouke de Baar
Join Date: Oct 2009
Posts: 127
Rep Power: 16
jack1980 is on a distinguished road
Hi,

For a test-case, I was hoping to do the following:

- Deform an airfoil, using a sum of multiple Hicks Henne deformations (SU2_DEF)
- Compute the direct and adjoint solution (SU2_CFD)
- Get the gradient of the drag with respect to the deformations (SU2_DOT)

So far, this seems to work for a single Hicks Henne deformation, when the .cfg file contains:

DV_KIND= HICKS_HENNE
DV_PARAM= [ 0 , 0.5 ]
DV_VALUE= 0.1

However, would it be possible to combine multiple deformations? I tried:

DV_KIND= HICKS_HENNE
DV_PARAM= [ [0,0.5] , [1,0.5] ]
DV_VALUE= [ 0.1 , 0.1 ]

but this doesn't seem to work.

Thank you very much for your help!
jack1980 is offline   Reply With Quote

Old   November 11, 2015, 08:27
Default
  #2
Super Moderator
 
Tim Albring
Join Date: Sep 2015
Posts: 195
Rep Power: 10
talbring is on a distinguished road
Hi jack1980,

the syntax is for multiple design variables is

DV_KIND=HICKS_HENNE, HICKS_HENNE, ...

DV_PARAM = (0.0, 0.05); (0.0, 0.1); ...

DV_VALUE= 0.5, 0.5, ....
lbfhappy, uyuig0, bornax and 1 others like this.
talbring is offline   Reply With Quote

Old   November 11, 2015, 18:24
Default
  #3
Senior Member
 
Jouke de Baar
Join Date: Oct 2009
Posts: 127
Rep Power: 16
jack1980 is on a distinguished road
Hi talbring, now it works, thank you very much for your help!
jack1980 is offline   Reply With Quote

Old   July 30, 2019, 16:01
Default
  #4
New Member
 
Shreyas Kini
Join Date: Jun 2019
Posts: 10
Rep Power: 6
Shreyaskini20 is on a distinguished road
Hi all,

I am trying out a similar test-case as Mr. Jouke. But in my case the only change being multiple FFD_CONTROL_POINT instead of HICKS_HENNE.

DV_KIND= FFD_CONTROL_POINT, FFD_CONTROL_POINT, ...
DV_PARAM= (SCB1, 0, 0, 0, 0, 0, 1); (SCB1, 0, 0, 1, 0, 0, 1); ..
DV_VALUE= 0.2, 0.2, 0.2, ..

But the syntax mentioned above doesn't seem to be working for me.

On running SU2_DOT_AD I am getting the the following error:
[localhost:07682] *** Process received signal ***
[localhost:07682] Signal: Segmentation fault (11)
[localhost:07682] Signal code: (128)
[localhost:07682] Failing at address: (nil)
[localhost:07682] [ 0] /lib64/libpthread.so.0(+0xf5d0)[0x7f7b143da5d0]
[localhost:07682] [ 1] SU2_DOT_AD[0x67546e]
[localhost:07682] [ 2] SU2_DOT_AD[0x65128d]
[localhost:07682] [ 3] SU2_DOT_AD[0x671c96]
[localhost:07682] [ 4] SU2_DOT_AD[0x41e10a]
[localhost:07682] [ 5] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7f7b14020495]
[localhost:07682] [ 6] SU2_DOT_AD[0x53bbee]
[localhost:07682] *** End of error message ***

I am using SU2 6.0.0 "Falcon".

Thank you very much for your help!
Shreyaskini20 is offline   Reply With Quote

Reply

Tags
hicks henne, multiple deformations

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 07:09
[ICEM] Multiple edges asal ANSYS Meshing & Geometry 2 March 22, 2013 11:10
OpenFOAM static build on Cray XT5 asaijo OpenFOAM Installation 9 April 6, 2011 13:21
Multiple domain/Multiple material problems... possible or not? Amiga500 OpenFOAM 1 April 14, 2010 16:32
Multiple reference frames? Moon Siemens 0 March 4, 2003 07:32


All times are GMT -4. The time now is 10:39.