SU2 process returned error '139' while running hypersonic shape optimization

meoazz · November 3, 2022, 13:45

Hello everyone,

I am trying to run a 2D shape optimization case in hypersonic regime, using discrete adjoint.

Firstly, I have performed the simulation in supersonic regime and everything works.

But when I try to switch to the hypersonic case (using SOLVER= NEMO_EULER) the simulation blows up after the first direct step, during the adjoint one.

The error that appears in the terminal is shown in Fig_1

The log_Adjoint.out is reported in Fig_2

Since it seems to be an error related to the SU2_CFD_AD function, I also tried to force this command directly inside the DESIGN/001/ADJOINT_DRAG folder: the error that appears in the terminal is shown in Fig_3

Do you have any ideas on how I can solve the problem?
Thank you in advance

Fig_1.jpg

Fig_2.jpg

Fig_3.png

wallym · November 7, 2022, 10:22

Hi Meoazz,

Thanks for using SU2-NEMO. At this time, NEMO does not have the capability for the discrete adjoint. I am currently working on finalizing the capability, including verification and validation; it should be available in the coming months.

Wally

November 3, 2022, 13:45	SU2 process returned error '139' while running hypersonic shape optimization	#1
meoazz New Member Join Date: May 2022 Posts: 1 Rep Power: 0	Hello everyone, I am trying to run a 2D shape optimization case in hypersonic regime, using discrete adjoint. Firstly, I have performed the simulation in supersonic regime and everything works. But when I try to switch to the hypersonic case (using SOLVER= NEMO_EULER) the simulation blows up after the first direct step, during the adjoint one. The error that appears in the terminal is shown in Fig_1 The log_Adjoint.out is reported in Fig_2 Since it seems to be an error related to the SU2_CFD_AD function, I also tried to force this command directly inside the DESIGN/001/ADJOINT_DRAG folder: the error that appears in the terminal is shown in Fig_3 Do you have any ideas on how I can solve the problem? Thank you in advance Fig_1.jpg Fig_2.jpg Fig_3.png

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to specify a restart file for SU2 during adjoint optimization	vikramaditya	SU2 Shape Design	2	June 24, 2022 14:15
Optimization of Nozzle in SU2	abk1234	Main CFD Forum	0	July 16, 2021 06:07
Optimization of Nozzle in SU2	abk1234	SU2	0	July 15, 2021 03:04
SU2 Shape optimization questions	AdriC	SU2 Shape Design	6	January 27, 2016 05:25
Problem running in parralel	Val	OpenFOAM Running, Solving & CFD	1	June 12, 2014 03:47

November 7, 2022, 10:22		#2
wallym Senior Member Wally Maier Join Date: Apr 2019 Posts: 123 Rep Power: 7	Hi Meoazz, Thanks for using SU2-NEMO. At this time, NEMO does not have the capability for the discrete adjoint. I am currently working on finalizing the capability, including verification and validation; it should be available in the coming months. Wally