k-omega SST

bensciens · March 6, 2013, 02:34

Is there a timeline for the introduction of the SST turbulence model or is there a way to run the model with limited capabilities?

Alejandro · March 6, 2013, 13:16

We are currently debugging the SST model, and expect it to be ready in the next few weeks. It'll be made available as soon as it is thoroughly validated.

Regards,
SU2 dev team

bensciens · March 7, 2013, 07:24

Thank you for your reply, may I also ask if you have any other turbulence models under development?

Alejandro · March 8, 2013, 12:03

We are also working on the gamma-Re_theta transition model of Menter. We hope both will be available soon.

taxalian · March 8, 2013, 14:13

Hi Aeljandro,
Thanks for sharing this information, i am really looking forward to gamma_Re-theta turbulence model. Are there any plans in near future to implement Reynolds Stress Model and Detached Eddy Simulations model.

thank you and best regards,
SU2 user.

Alejandro · March 8, 2013, 14:39

Not in the short term. But due to the open source nature of SU2, if you are quite interested in such features you are more than welcomed to go ahead and implement them yourself. That way, other users who may also want such advanced models will also have them available.

taxalian · March 8, 2013, 14:52

Hi Alejandro,
Thank you for your reply and information.
SU2 user.

March 6, 2013, 02:34	k-omega SST	#1
bensciens New Member Ben Join Date: Mar 2013 Posts: 15 Rep Power: 13	Is there a timeline for the introduction of the SST turbulence model or is there a way to run the model with limited capabilities?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
overshooting of Omega in SST komega using simpleFoam	cm_jubayer	OpenFOAM	2	June 7, 2020 12:52
Scaling omega in SST turbulence model	TedBrogan	Main CFD Forum	0	January 23, 2013 00:00
SST K- omega turbulence model	mb.pejvak	Main CFD Forum	8	September 16, 2011 08:52
Boundary Conditions for k omega SST	dancfd	OpenFOAM Pre-Processing	0	June 9, 2011 23:25
Wall function implementation K Omega SSt	cbarry	OpenFOAM	3	August 18, 2009 10:09

March 6, 2013, 13:16		#2
Alejandro New Member Alejandro Campos Join Date: Mar 2013 Posts: 3 Rep Power: 13	We are currently debugging the SST model, and expect it to be ready in the next few weeks. It'll be made available as soon as it is thoroughly validated. Regards, SU2 dev team

March 7, 2013, 07:24		#3
bensciens New Member Ben Join Date: Mar 2013 Posts: 15 Rep Power: 13	Thank you for your reply, may I also ask if you have any other turbulence models under development?

March 8, 2013, 12:03		#4
Alejandro New Member Alejandro Campos Join Date: Mar 2013 Posts: 3 Rep Power: 13	We are also working on the gamma-Re_theta transition model of Menter. We hope both will be available soon.

March 8, 2013, 14:13		#5
taxalian Senior Member Join Date: Nov 2010 Posts: 139 Rep Power: 15	Hi Aeljandro, Thanks for sharing this information, i am really looking forward to gamma_Re-theta turbulence model. Are there any plans in near future to implement Reynolds Stress Model and Detached Eddy Simulations model. thank you and best regards, SU2 user.

March 8, 2013, 14:39		#6
Alejandro New Member Alejandro Campos Join Date: Mar 2013 Posts: 3 Rep Power: 13	Not in the short term. But due to the open source nature of SU2, if you are quite interested in such features you are more than welcomed to go ahead and implement them yourself. That way, other users who may also want such advanced models will also have them available.

March 8, 2013, 14:52		#7
taxalian Senior Member Join Date: Nov 2010 Posts: 139 Rep Power: 15	Hi Alejandro, Thank you for your reply and information. SU2 user.