adapted restart file error (2.0.7)

jentink · October 8, 2013, 13:30

When I run SU2_MAC, the restart file it produces is
1) missing the header line, and
2) missing several variables

My original restart first 2 lines is this:

"PointID", "x", "y", "Conservative_1", "Conservative_2", "Conservative_3", "Conservative_4", "Conservative_5", "Pressure", "Pressure_Coefficient", "Mach", "Temperature", "Laminar_Viscosity", "Skin_Friction_Coefficient", "Heat_Transfer", "Y_Plus", "Eddy_Viscosity", "Sharp_Edge_Dist"
0 1.836970198721030e-14 1.000000000000000e+02 4.626955188677733e-01 1.118599216033436e+02 4.435341274233010e+00 1.044811679021415e+05 1.114171806267748e-04 3.637537804245055e+04 0.000000000000000e+00 7.292899300450625e-01 2.730962987787274e+02 1.722347819756884e-05 0.000000000000000e+00 0.000000000000000e+00 0.000000000000000e+00 3.593151904515756e-06 1.000000000001882e+02

The restart file from SU2_MAC has this as first line:

0 -4.936032010292950e-42 5.092789899107159e-313 1.518777012825012e-02 -3.310458033267381e-02

jentink · October 8, 2013, 20:10

It's been fixed if anybody is interested.

Just get new 2.0.8 on github

October 8, 2013, 13:30	adapted restart file error (2.0.7)	#1
jentink Member Tom Jentink Join Date: Jan 2013 Posts: 61 Rep Power: 13	When I run SU2_MAC, the restart file it produces is 1) missing the header line, and 2) missing several variables My original restart first 2 lines is this: "PointID", "x", "y", "Conservative_1", "Conservative_2", "Conservative_3", "Conservative_4", "Conservative_5", "Pressure", "Pressure_Coefficient", "Mach", "Temperature", "Laminar_Viscosity", "Skin_Friction_Coefficient", "Heat_Transfer", "Y_Plus", "Eddy_Viscosity", "Sharp_Edge_Dist" 0 1.836970198721030e-14 1.000000000000000e+02 4.626955188677733e-01 1.118599216033436e+02 4.435341274233010e+00 1.044811679021415e+05 1.114171806267748e-04 3.637537804245055e+04 0.000000000000000e+00 7.292899300450625e-01 2.730962987787274e+02 1.722347819756884e-05 0.000000000000000e+00 0.000000000000000e+00 0.000000000000000e+00 3.593151904515756e-06 1.000000000001882e+02 The restart file from SU2_MAC has this as first line: 0 -4.936032010292950e-42 5.092789899107159e-313 1.518777012825012e-02 -3.310458033267381e-02

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to calculate mass flow rate on patches and summation of that during the run?	immortality	OpenFOAM Post-Processing	104	February 16, 2021 08:46
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12	keepfit	ParaView	60	September 18, 2013 03:23
[swak4Foam] swak4Foam-groovyBC build problem	zxj160	OpenFOAM Community Contributions	18	July 30, 2013 13:14
"parabolicVelocity" in OpenFoam 2.1.0 ?	sawyer86	OpenFOAM Running, Solving & CFD	21	February 7, 2012 11:44
pisoFoam compiling error with OF 1.7.1 on MAC OSX	Greg Givogue	OpenFOAM Programming & Development	3	March 4, 2011 17:18

October 8, 2013, 20:10		#2
jentink Member Tom Jentink Join Date: Jan 2013 Posts: 61 Rep Power: 13	It's been fixed if anybody is interested. Just get new 2.0.8 on github