How can I view an SU2 mesh?

vmajor · January 20, 2014, 03:15

I am just starting to evaluate SU2 and I cannot find this information.

What application can I use to open and view the SU2 meshes from the TestCases?

The idea is to see how they were made and modify some for my own evaluation needs.

I have access to gmsh and engrid 1.4. I know that they can both export SU2, but I want to import SU2.

V.

ceanwang · January 20, 2014, 08:02

Hi,

I just wrote an extension which let SU2_CFD.exe exports mesh in GMSH's old pos format. So you could view that pos file with GMSH.

It's tested under win7@32. Download my exe file here.

It is the same as su2_cfd.exe, but only exports flow.pos when you specify Tecplot format in cfg file.

At the moment, only 2d meshes are supported.

Hope that will help.

Cean

vmajor · January 21, 2014, 03:40

Thanks for that...only I am on Linux (Ubuntu 12.04 x64). Could you perhaps compile it for Ubuntu?

Cheers,

V.

ceanwang · January 21, 2014, 06:22

You can compile it by yourself.

Simply copy my output_tecplot.cpp into su2_cfd\src folder and re-make.

see my other post about "Add GMSH output" to download that file.

vmajor · January 22, 2014, 03:40

OK... where can I get your version of output_tecplot.cpp from?

Thanks,

V.

nvm, found it in your other post here: http://www.cfd-online.com/Forums/su2...sh-output.html

January 20, 2014, 03:15	How can I view an SU2 mesh?	#1
vmajor New Member Victor Major Join Date: Jan 2012 Posts: 10 Rep Power: 14	I am just starting to evaluate SU2 and I cannot find this information. What application can I use to open and view the SU2 meshes from the TestCases? The idea is to see how they were made and modify some for my own evaluation needs. I have access to gmsh and engrid 1.4. I know that they can both export SU2, but I want to import SU2. V.

January 22, 2014, 03:40		#5
vmajor New Member Victor Major Join Date: Jan 2012 Posts: 10 Rep Power: 14	OK... where can I get your version of output_tecplot.cpp from? Thanks, V. nvm, found it in your other post here: http://www.cfd-online.com/Forums/su2...sh-output.html Last edited by vmajor; January 22, 2014 at 04:57.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mesh motion with Translation & Rotation	Doginal	CFX	2	January 12, 2014 06:21
[ICEM] Mirror Mesh \| Delete duplicate mesh	pythag0ra5	ANSYS Meshing & Geometry	6	November 19, 2013 07:35
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
engrid -> save as .stl with boundarie codes	Zymon	enGrid	31	August 29, 2011 13:40
basic of mesh refinement	arya	CFX	4	June 19, 2007 12:21

January 20, 2014, 08:02		#2
ceanwang Member cean wang Join Date: Feb 2013 Posts: 43 Rep Power: 13	Hi, I just wrote an extension which let SU2_CFD.exe exports mesh in GMSH's old pos format. So you could view that pos file with GMSH. It's tested under win7@32. Download my exe file here. It is the same as su2_cfd.exe, but only exports flow.pos when you specify Tecplot format in cfg file. At the moment, only 2d meshes are supported. Hope that will help. Cean

January 21, 2014, 03:40		#3
vmajor New Member Victor Major Join Date: Jan 2012 Posts: 10 Rep Power: 14	Thanks for that...only I am on Linux (Ubuntu 12.04 x64). Could you perhaps compile it for Ubuntu? Cheers, V.

January 21, 2014, 06:22		#4
ceanwang Member cean wang Join Date: Feb 2013 Posts: 43 Rep Power: 13	You can compile it by yourself. Simply copy my output_tecplot.cpp into su2_cfd\src folder and re-make. see my other post about "Add GMSH output" to download that file.