CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > SU2

Issues with history.dat

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 29, 2019, 13:22
Default Issues with history.dat
  #1
New Member
 
Pablo Garrido
Join Date: May 2019
Location: Netherlands
Posts: 7
Rep Power: 6
pgdelaserna is on a distinguished road
Hello,

I'm currently running some simulations using SU2_CFD (feature_turbomachinery) and, by checking the output of the terminal and the flow.dat generated after running SU2_SOL the simulations seem to have converged.

However, when I check the file "history.dat" to read the values of the entropy generation (for example) this file is full of zeros (except for the columns corresponding to the residuals). I have attached a link to a picture which shows what I'm obtaining.

What is worrying me is that the rest of the output seems fine (flow.dat, terminal output) but then the history.dat is completely off.

I've checked the settings in the configuration file and they all seem fine, identical to other simulations in which I did not get this issue.

Any help on how to fix this will be greatly appreciated!

Pablo

pgdelaserna is offline   Reply With Quote

Old   September 30, 2019, 14:13
Default Check the parameters again
  #2
New Member
 
Aman uz zaman Baig
Join Date: Nov 2015
Location: Cincinnati, US
Posts: 16
Rep Power: 10
aman_baig is on a distinguished road
If your WRT_CON_FREQ is 1 then it should print out the history of all of it. However, I have seen a problem in master version (6.2.0) where if I have 3 zones the history file has 4 zones of which the first one has no data. Are you having the same issue with master or develop?

I have a question for you too.
I also use SU2 to run Turbomachinery cases and have seen the feature_turbomachinery branch on GitHub. Are you working on this branch? What are the additional capabilities this branch has right now?


Aman
aman_baig is offline   Reply With Quote

Reply

Tags
convergence history, output

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
chtMultiRegionSimpleFoam issues - non-conformal meshes & residual handling... manalis OpenFOAM Running, Solving & CFD 3 October 10, 2018 19:53
Convergence issues for Flat plate with sharp edge rajnarayang FLUENT 3 June 20, 2017 13:02
[ANSYS Meshing] Multizone issues (on my project) crenaudo ANSYS Meshing & Geometry 8 April 13, 2016 03:59
Multigrid Stability Issues ThomasHermann SU2 1 November 5, 2014 17:18
[General] Some Paraview Issues I can not solve MR_Chicho ParaView 1 September 24, 2012 06:03


All times are GMT -4. The time now is 08:20.