SU2 capability for turbomachinary applictions

Vino · February 26, 2016, 13:59

Hi,

Can we use SU2 for turbo-machinery simulations with multiple stator and rotor. Are the required special conditions(Multiple Reference Frame, Sliding Contact, etc) available with SU2 V4 at this stage? If not multistage, is single stage with one rotor and stator simulation possible? Please clarify. Thank you very much in advance.

tsevine · March 7, 2016, 04:23

Hi Vino,

please check this tutorial.

Turbomachinery

TNS

Vino · March 7, 2016, 11:21

Dear TNS,

Thanks for you reply. It seems that we can do turbo-machinay simulation using SU2. However, the tutorial folder is not complete and is having only config file. I think I can check it out with my mesh. Thanks.

Regards,
Vino

talbring · March 7, 2016, 11:24

Hi Vino,

there are many more features in development right now. So stay tuned

Tim

bennn · March 10, 2016, 04:38

Don't forget to follow the instructions in there if you want to download the meshes. These are kept in a separate place.

https://github.com/su2code/SU2/wiki/Test-Cases

February 26, 2016, 13:59	SU2 capability for turbomachinary applictions	#1
Vino Senior Member Vino Join Date: Mar 2013 Posts: 130 Rep Power: 13	Hi, Can we use SU2 for turbo-machinery simulations with multiple stator and rotor. Are the required special conditions(Multiple Reference Frame, Sliding Contact, etc) available with SU2 V4 at this stage? If not multistage, is single stage with one rotor and stator simulation possible? Please clarify. Thank you very much in advance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Release of SU2 V3.2	economon	SU2 News & Announcements	6	April 17, 2015 23:28
Pointwise-SU2 joint webinar (April 29th) and SU2 v3.1.0 new release	fpalacios	SU2 News & Announcements	1	April 30, 2014 02:40
Official release of SU2 V3.0 and SU2 Educational V1.0	fpalacios	SU2 News & Announcements	2	January 22, 2014 05:28
SU2 suite has moved to GitHub!	fpalacios	SU2 News & Announcements	0	August 12, 2013 02:07
Welcome to the Stanford University Unstructured (SU2) forum!	economon	SU2	0	January 7, 2013 02:48

March 7, 2016, 04:23		#2
tsevine New Member Tansu Join Date: Apr 2014 Location: Turkey Posts: 16 Rep Power: 12	Hi Vino, please check this tutorial. Turbomachinery TNS

March 7, 2016, 11:21		#3
Vino Senior Member Vino Join Date: Mar 2013 Posts: 130 Rep Power: 13	Dear TNS, Thanks for you reply. It seems that we can do turbo-machinay simulation using SU2. However, the tutorial folder is not complete and is having only config file. I think I can check it out with my mesh. Thanks. Regards, Vino

March 7, 2016, 11:24		#4
talbring Super Moderator Tim Albring Join Date: Sep 2015 Posts: 195 Rep Power: 10	Hi Vino, there are many more features in development right now. So stay tuned Tim

March 10, 2016, 04:38		#5
bennn Member benoit paillard Join Date: Mar 2010 Posts: 96 Rep Power: 16	Don't forget to follow the instructions in there if you want to download the meshes. These are kept in a separate place. https://github.com/su2code/SU2/wiki/Test-Cases