CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > SU2

total conditions inlet BC reference

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 3, 2017, 09:46
Default total conditions inlet BC reference
  #1
Zen
Member
 
Zeno
Join Date: Sep 2013
Location: Delft, The Netherlands
Posts: 63
Rep Power: 9
Zen is on a distinguished road
Hi everybody,

Does anybody know where I can find a reference for the inlet boundary condition with TOTAL_CONDITIONS implementation?

Thanks in advance,

Z
Zen is offline   Reply With Quote

Old   July 3, 2017, 11:29
Default
  #2
Senior Member
 
Vino
Join Date: Mar 2013
Posts: 130
Rep Power: 10
Vino is on a distinguished road
Please refer to "config_template.cfg" in SU2 installation directory.

it says
Code:
% Inlet boundary type (TOTAL_CONDITIONS, MASS_FLOW)
INLET_TYPE= TOTAL_CONDITIONS
%
% Inlet boundary marker(s) with the following formats (NONE = no marker) 
% Total Conditions: (inlet marker, total temp, total pressure, flow_direction_x, 
%           flow_direction_y, flow_direction_z, ... ) where flow_direction is
%           a unit vector.
% Mass Flow: (inlet marker, density, velocity magnitude, flow_direction_x, 
%           flow_direction_y, flow_direction_z, ... ) where flow_direction is
%           a unit vector.
Vino is offline   Reply With Quote

Old   July 4, 2017, 08:45
Default
  #3
Zen
Member
 
Zeno
Join Date: Sep 2013
Location: Delft, The Netherlands
Posts: 63
Rep Power: 9
Zen is on a distinguished road
Thanks Vino for your answer but I was referring to an article where the derivation of the inlet boundary condition using Riemann invariants was described. I found something in Hirsch, vol 2 but I couldn't find exactly the formulation used in SU2.

Best,

Z
Zen is offline   Reply With Quote

Reply

Tags
boundary condition, inlet, reference, total conditions

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error in compiling new drag model k.farnagh OpenFOAM Programming & Development 13 May 21, 2016 04:08
Second Derivative Zero - Boundary Condition fu-ki-pa OpenFOAM 10 May 1, 2014 17:26
OF211: ThirdParty and /src compiled, but not /applications... vkrastev OpenFOAM Installation 8 October 18, 2012 16:53
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
air bubble is disappear increasing time using vof xujjun CFX 9 June 9, 2009 08:59


All times are GMT -4. The time now is 11:42.