SU2 v6.0 turbulence models.

raz · March 2, 2018, 04:06

Hi all,

Was curious if anyone could point me in the direction of the references behind the latest turbulence models added in SU2 v6.0. (SA_NEG, SA_E, SA_COMP and SA_E_COMP) I'm curious what are the exact differences as I'd like to do a turbulence modelling study on buffeting.

SIDE NOTE: Does anyone know how to make SU2 stop writing the *.csv solution every time step in unsteady simulations? I've had troubles using the WRT_CSV_SOL = NO command.

Regards,

raz · March 2, 2018, 04:26

searched the code and found out that:

SA_NEG = SA Negative

Allmaras, S. R., Johnson, F. T., and Spalart, P. R., "Modifications and Clarifications for the Implementation of the Spalart-Allmaras Turbulence Model," ICCFD7-1902, 7th International Conference on Computational Fluid Dynamics, Big Island, Hawaii, 9-13 July 2012.

SA_E = SA with Edwards Correction

Edwards, J. R. and Chandra, S. "Comparison of Eddy Viscosity-Transport Turbulence Models for Three-Dimensional, Shock-Separated Flowfields," AIAA Journal, Vol. 34, No. 4, 1996, pp. 756-763.

SA_COMP = SA with compressibility correction

Spalart, P. R., "Trends in Turbulence Treatments," AIAA 2000-2306, June 2000.

March 2, 2018, 04:06	SU2 v6.0 turbulence models.	#1
raz Member Join Date: Nov 2015 Posts: 30 Rep Power: 10	Hi all, Was curious if anyone could point me in the direction of the references behind the latest turbulence models added in SU2 v6.0. (SA_NEG, SA_E, SA_COMP and SA_E_COMP) I'm curious what are the exact differences as I'd like to do a turbulence modelling study on buffeting. SIDE NOTE: Does anyone know how to make SU2 stop writing the *.csv solution every time step in unsteady simulations? I've had troubles using the WRT_CSV_SOL = NO command. Regards,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding turbulence models to (reacting)TwoPhaseEulerFoam	lavdwall	OpenFOAM Running, Solving & CFD	0	February 3, 2017 03:04
y+ range for turbulence models	babri	FLUENT	1	August 30, 2016 17:39
in k-epsilon wall function approach high Re turbulence models: question of velocity	romant	OpenFOAM Programming & Development	6	May 26, 2016 09:14
Advice about turbulence models?	mqsim	OpenFOAM Running, Solving & CFD	6	April 27, 2016 07:50
Only two turbulence options available in CFX Pre	Jack001	CFX	5	March 30, 2016 02:47

March 2, 2018, 04:26		#2
raz Member Join Date: Nov 2015 Posts: 30 Rep Power: 10	searched the code and found out that: SA_NEG = SA Negative Allmaras, S. R., Johnson, F. T., and Spalart, P. R., "Modifications and Clarifications for the Implementation of the Spalart-Allmaras Turbulence Model," ICCFD7-1902, 7th International Conference on Computational Fluid Dynamics, Big Island, Hawaii, 9-13 July 2012. SA_E = SA with Edwards Correction Edwards, J. R. and Chandra, S. "Comparison of Eddy Viscosity-Transport Turbulence Models for Three-Dimensional, Shock-Separated Flowfields," AIAA Journal, Vol. 34, No. 4, 1996, pp. 756-763. SA_COMP = SA with compressibility correction Spalart, P. R., "Trends in Turbulence Treatments," AIAA 2000-2306, June 2000.