|
[Sponsors] |
August 7, 2020, 03:07 |
High temperature flow
|
#1 |
New Member
Liam111
Join Date: Oct 2015
Posts: 5
Rep Power: 11 |
Does SU2 support high-temperature frozen flow? i.e where various thermodynamic properties are a function of the local static temperature? mu = mu(T), gamma = gamma(T)?
|
|
August 8, 2020, 04:53 |
|
#2 |
Senior Member
Pedro Gomes
Join Date: Dec 2017
Posts: 466
Rep Power: 14 |
SU2 can use polynomial models of thermal conductivity and laminar viscosity.
Non ideal fluids (variable gamma) can be modeled via Van der Walls' or Peng-Robinson's models. There is also on-going development for hypersonic flows (including the modeling of chemical reactions, ionization) see https://github.com/su2code/SU2/pull/1014 and SU2 V7.0.5 Hypersonic |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
whats the cause of error? | immortality | OpenFOAM Running, Solving & CFD | 13 | March 24, 2021 08:15 |
Decreased Mass Flow Rate for Same Gometry with Increased Temperature? | yanqoue | CFX | 1 | November 13, 2019 17:21 |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 06:21 |
how to set up high temperature gas turbine flow simulation? | adam2008 | CFX | 1 | July 22, 2009 19:33 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 22:31 |