[kiloWatt]

Hello,
I am running a, unsteady transonic NACA64A010 aeroelastic calculation in SU2 7.0.8.
I am attaching my .cfg file and the .su2 file can be found at

https://raw.githubusercontent.com/su...hybrid_inv.su2

I want to run the simulation and then restart it from the last computed timestep (999). Since I am running in dual-time-stepping 2nd order, I have to rename the last 3 timesteps from "restart_flow....dat" to "solution_flow...dat", but I have two problems:

1) if I provide only the "solution_flow...dat" files, the program will ask me also for the "solution_flow...csv" files. If I give both the .csv and the .dat, this problem seems to disappear

2) even if problem 1 seems to be solved, the restarted solution is not working properly, see figure.

I restart the file as described in the User Guide on GitHub (https://su2code.github.io/docs_v7/Restart-File/) , but something is not working properly.

Could you please help me?

Thank you in advance

[pcg]

The aeroelastic implementation never saves its state, and so it cannot restart properly.
Unfortunately the original author is not around to maintain that feature.

[kiloWatt]

Thank you very much Pedro.