|
[Sponsors] |
![]() |
![]() |
#1 |
Member
Zhang
Join Date: Mar 2023
Posts: 72
Rep Power: 3 ![]() |
Hi,
I try to run the tutorials---Turbulent Flat Plate. But it occurs many problem. It said Error in "void CConfig::SetConfig_Parsing(char*)": ------------------------------------------------------------------------- SOLVER: invalid option name. Check current SU2 options in config_template.cfg. CONV_FIELD: invalid option name. Check current SU2 options in config_template.cfg. CONV_RESIDUAL_MINVAL: invalid option name. Check current SU2 options in config_template.cfg. CONV_STARTITER: invalid option name. Check current SU2 options in config_template.cfg. CONV_CAUCHY_ELEMS: invalid option name. Check current SU2 options in config_template.cfg. CONV_CAUCHY_EPS: invalid option name. Check current SU2 options in config_template.cfg. SOLUTION_FILENAME: invalid option name. Check current SU2 options in config_template.cfg. TABULAR_FORMAT: invalid option name. Check current SU2 options in config_template.cfg. RESTART_FILENAME: invalid option name. Check current SU2 options in config_template.cfg. VOLUME_FILENAME: invalid option name. Check current SU2 options in config_template.cfg. SURFACE_FILENAME: invalid option name. Check current SU2 options in config_template.cfg. OUTPUT_WRT_FREQ: invalid option name. Check current SU2 options in config_template.cfg. SCREEN_OUTPUT: invalid option name. Check current SU2 options in config_template.cfg. __________________________________________________ _______ I wonder if the different version leads to this results. My version is 6.2.0. And how can I solve it. |
|
![]() |
![]() |
![]() |
![]() |
#2 |
Member
PENG YAN
Join Date: Jul 2021
Location: Italy
Posts: 34
Rep Power: 5 ![]() |
Because your version of SU2 is old and some option names have been changed in the latest version of SU2.
So just download the latest version of SU2 and run tutorials again. |
|
![]() |
![]() |
![]() |
![]() |
#3 | |
Member
Zhang
Join Date: Mar 2023
Posts: 72
Rep Power: 3 ![]() |
Quote:
If I want to install the new version, should I uninstall the old version firstly? Or just install the new one. |
||
![]() |
![]() |
![]() |
![]() |
#4 |
Member
PENG YAN
Join Date: Jul 2021
Location: Italy
Posts: 34
Rep Power: 5 ![]() |
||
![]() |
![]() |
![]() |
![]() |
#5 |
Member
Zhang
Join Date: Mar 2023
Posts: 72
Rep Power: 3 ![]() |
||
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[solids4Foam] Problems while validating Turek and Hron (2006) FSI2 and FSI3 problems in solids4Foam | subhasisa.rath | OpenFOAM CC Toolkits for Fluid-Structure Interaction | 0 | September 6, 2021 17:37 |
What is the reason for the lack of convergence in solving thermodynamic problems? | NoITMan | Main CFD Forum | 0 | May 25, 2021 07:52 |
Needed Benchmark Problems for FSI | Mechstud | Main CFD Forum | 4 | July 26, 2011 13:13 |
All Tutorials and Example Problems Definitions | bucksfan | OpenFOAM | 2 | July 6, 2009 09:14 |
All Tutorials and Example Problems Definitions | bucksfan | OpenFOAM | 2 | July 3, 2009 11:25 |