|
[Sponsors] |
October 21, 2015, 00:06 |
Transient Structural Time Step Issues
|
#1 |
New Member
Nick
Join Date: Oct 2015
Posts: 4
Rep Power: 11 |
Hi, I am simulating the effects of pressures on a thin wall at various time steps using ANSYS Transient Structure. For simplicity sake I have uploaded pressure data for 6 time steps that are 0.0005, 0.001, 0.0015, 0.002, 0.0025, 0.003 seconds. However, in these data files come from a CFX transient solution in which the time steps were 0.0001 seconds. I saved every 5th time step from the CFX solution and uploaded the pressure data for 6 time steps that are 0.0005, 0.001, 0.0015, 0.002, 0.0025, 0.003 seconds. I am having issues figuring out how to set up the time steps (or substeps) in the analysis settings. Can anyone help push me figure out how to set up these transient time steps?
Thank you!! |
|
Tags |
fsi, time steps, transient structural |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Extrusion with OpenFoam problem No. Iterations 0 | Lord Kelvin | OpenFOAM Running, Solving & CFD | 8 | March 28, 2016 12:08 |
Sudden jump in Courant number | NJG | OpenFOAM Running, Solving & CFD | 7 | May 15, 2014 14:52 |
1-way time step problem in doing FSI between Fluent and Transient Structural | sihaqqi | ANSYS | 0 | November 21, 2013 03:45 |
plot over time | fferroni | OpenFOAM Post-Processing | 7 | June 8, 2012 08:56 |
Time step in transient simulation | shib | FLUENT | 0 | June 17, 2010 14:07 |