CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Tecplot (https://www.cfd-online.com/Forums/tecplot/)
-   -   How to use variables from two zones? or how to combine them? (https://www.cfd-online.com/Forums/tecplot/106299-how-use-variables-two-zones-how-combine-them.html)

moh1367 August 24, 2012 06:01

How to use variables from two zones? or how to combine them?
 
Hi guys...

In my project I have to put my variables in different files for all time steps, now I wanted to know is there is solution in order to combine them again in Tecplot?
After loading the data each of the variables shows as a separate zone and I mean e.g. plot velocity from one zone vs pressure in other zone.

Thank you.

Best
Mohammad

Светлана January 6, 2014 01:26

I have the same problem.

alejandro_1980 November 1, 2017 14:30

about multiple variables
 
Quote:

Originally Posted by moh1367 (Post 378510)
Hi guys...

In my project I have to put my variables in different files for all time steps, now I wanted to know is there is solution in order to combine them again in Tecplot?
After loading the data each of the variables shows as a separate zone and I mean e.g. plot velocity from one zone vs pressure in other zone.

Thank you.

Best
Mohammad

You need to go to zone style, locate the zone which you wanna change variable and under flooding choose the desired variable.

Best Regards

Alejandro


All times are GMT -4. The time now is 01:07.