CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Tecplot (https://www.cfd-online.com/Forums/tecplot/)
-   -   OpenFOAM Tecplot Data Loader after renumberMesh crashes (https://www.cfd-online.com/Forums/tecplot/148627-openfoam-tecplot-data-loader-after-renumbermesh-crashes.html)

hxaxtma February 16, 2015 05:50
OpenFOAM Tecplot Data Loader after renumberMesh crashes
 
Hi guys,

after using "renumberMesh" I am not able to load any OF results into Tecplot. I am using Tec360ex and tried also with different versions.

I know that this hast to do somehting with the renumbering of the polyMesh...so is there any workaround for this bug?

Of course I could use foamToTec360, but I would prefer the Data Loader of Tecplot itself.

This is my output:
Code:
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x4da60e) [0x7f5c2348660e]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x4db449) [0x7f5c23487449]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x28d369) [0x7f5c23239369]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x10340) [0x7f5c1b32f340]
/lib/x86_64-linux-gnu/libc.so.6(+0x9d744) [0x7f5c196fc744]
/opt/tec360/tec360exR2/bin/../bin/libtecutildataio_loadfea.so(vdm_DatasetResult+0xb9) [0x7f5b7ecc1679]
/opt/tec360/tec360exR2/bin/../bin/libtecutildataio_loadfea.so(+0xae961) [0x7f5b7ec39961]
/opt/tec360/tec360exR2/bin/../bin/libtecutildataio_loadfea.so(+0xaf4b6) [0x7f5b7ec3a4b6]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x17f102) [0x7f5c2312b102]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x17f68b) [0x7f5c2312b68b]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x16bc64) [0x7f5c23117c64]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x181aa2) [0x7f5c2312daa2]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x183a14) [0x7f5c2312fa14]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x2435db) [0x7f5c231ef5db]
/opt/tec360/tec360exR2/bin/../bin/libtpsdkbase.so(+0x243a83) [0x7f5c231efa83]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x8182) [0x7f5c1b327182]
/lib/x86_64-linux-gnu/libc.so.6(clone+0x6d) [0x7f5c1975a00d]

hxaxtma February 23, 2015 08:08
Hi,

I got a workaround for this problem, just if anyone is interested:

1)rename 0/ to /0.bak
2) rename new timefolder after renumbering to 0/
3) start calculation
4) Tecplot can load the data

You can do this also afterwards

JerimiahLee March 18, 2015 09:03
Hello hxaxtma,

Previous version of Tecplot were able to load in a renumberMesh data file, but we believe it was not being loaded in correctly. When loaded into Tecplot 360 2013 R1, all that is added is an additional time step. From the research I have done, it should be replacing the entire mesh structure.

What would you expect Tecplot to display when loading a data file that has been renumbered?


All times are GMT -4. The time now is 17:04.