CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > Tecplot

creating Cell-centered variable dat file for tecplot

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 19, 2016, 04:34
Wink creating Cell-centered variable dat file for tecplot
  #1
DJ4
New Member
 
Alireza Ahani
Join Date: Jul 2015
Location: Iran-Tehran
Posts: 7
Rep Power: 11
DJ4 is on a distinguished road
Hi guys.
It is your generosity reading my question.
Could anyone help me with diagnosing the error of this data file?(i've attached)
i wanted to make a *.dat file for tecplot to show the contour of my simple domain, this domain includes a rectangle with horizontal and vertical grid with pressure variable at cell-centers but i can't get the point to fix the problem of this file.
plus i attached a similar working case which i wanted to imitate.
thank you in advance...

https://www.dropbox.com/s/kd6j2quta6...gCase.dat?dl=0

https://www.dropbox.com/s/1hlu2zjroj...stion.png?dl=0

https://www.dropbox.com/s/6zotxr7gyk...stion.dat?dl=0
DJ4 is offline   Reply With Quote

Old   July 20, 2016, 14:23
Smile the answer
  #2
DJ4
New Member
 
Alireza Ahani
Join Date: Jul 2015
Location: Iran-Tehran
Posts: 7
Rep Power: 11
DJ4 is on a distinguished road
Hi again friends.
I found the answer at last, Do you want to know that?
DJ4 is offline   Reply With Quote

Reply

Tags
cell center, cfd - post, tecplot

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to calculate mass flow rate on patches and summation of that during the run? immortality OpenFOAM Post-Processing 104 February 16, 2021 09:46
[OpenFOAM.org] Error creating ParaView-4.1.0 OpenFOAM 2.3.0 tlcoons OpenFOAM Installation 13 April 20, 2016 18:34
[swak4Foam] funkySetFields compilation error tayo OpenFOAM Community Contributions 39 December 3, 2012 06:18
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 23:11.