CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > Tecplot

Tecplot .plt file to cgns format

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 24, 2017, 17:47
Default Tecplot .plt file to cgns format
  #1
New Member
 
Akshay Bagi
Join Date: Feb 2013
Posts: 17
Rep Power: 13
akshaybagi is on a distinguished road
Hi,

I have a .plt file that is an output of starccm+. It has mesh and solution data in it. I want to convert this .plt file into a cgns file that has mesh and solution data again. Can anyone please tell me how to do this?

Thanks
Akshay
akshaybagi is offline   Reply With Quote

Old   February 25, 2017, 00:22
Default
  #2
Member
 
Join Date: May 2013
Posts: 61
Rep Power: 12
novedevon is on a distinguished road
Output it directly from Star. The direct CGNS output is better anyways. If you are running into the 64bit issue loading into tecplot try 2017R1 as it supports 64bit CGNS
novedevon is offline   Reply With Quote

Old   February 25, 2017, 02:38
Default
  #3
New Member
 
Akshay Bagi
Join Date: Feb 2013
Posts: 17
Rep Power: 13
akshaybagi is on a distinguished road
Hi novedevon,

The problem is star can only output only mesh data and no solution data. I need the CGNS file to contain both mesh and solution data. Star doesn't support that.

Cheers
Akshay
akshaybagi is offline   Reply With Quote

Reply

Tags
.plt, cgns, conversion, starccm+, tecplot

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
polynomial BC srv537 OpenFOAM Pre-Processing 4 December 3, 2016 10:07
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 17:02
pisoFoam compiling error with OF 1.7.1 on MAC OSX Greg Givogue OpenFOAM Programming & Development 3 March 4, 2011 18:18
ParaView Compilation jakaranda OpenFOAM Installation 3 October 27, 2008 12:46
DxFoam reader update hjasak OpenFOAM Post-Processing 69 April 24, 2008 02:24


All times are GMT -4. The time now is 11:36.