CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Tecplot (https://www.cfd-online.com/Forums/tecplot/)
-   -   How to show reference vector plot in Tecplot 360 EX 2015? (https://www.cfd-online.com/Forums/tecplot/192190-how-show-reference-vector-plot-tecplot-360-ex-2015-a.html)

fruitkiwi August 30, 2017 14:23

How to show reference vector plot in Tecplot 360 EX 2015?
 
1 Attachment(s)
Hi, Guys,

I am currently using Tecplot 360 EX 2015. I cannot find the reference vector under Vector sub plot
According to the manual,
To display a reference vector, select “Reference Vector” from Vector sub-menu of the Plot menu.
Attachment 58117

May I know if reference vector plot still available in Tecplot 360 EX 2015?
anyone try it?

Many thanks.

novedevon August 31, 2017 12:52

Sadly Reference Vector was a later addition with the port to Tecplot EX so the first version with Reference Vector is Tecplot 360 EX 2016 R2 any version later than that will have the dialog.

Note you can show the Reference Vector though the macro language in 2015.

If you have any questions feel free to contact support@tecplot.com

Devon
Tecplot Technical Product Engineer

fruitkiwi August 31, 2017 13:37

Quote:

Originally Posted by novedevon (Post 662608)
Sadly Reference Vector was a later addition with the port to Tecplot EX so the first version with Reference Vector is Tecplot 360 EX 2016 R2 any version later than that will have the dialog.

Note you can show the Reference Vector though the macro language in 2015.

If you have any questions feel free to contact support@tecplot.com

Devon
Tecplot Technical Product Engineer

Thanks Devon. that's good, I sure give it a try.


All times are GMT -4. The time now is 06:49.