CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > Tecplot

Tecplot360 xy-line plot help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 5, 2008, 04:22
Default Tecplot360 xy-line plot help
  #1
siw
Guest
 
Posts: n/a
I've run a 2D oblique shock case in Fluent and want to plot the pressure, Mach, temperature data across the shock. How can I do that in tecplot? I cannot see how to select pressure data along the x-axis for one y-axis point.

Thanks
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Gmsh] Problem with Gmsh nishant_hull OpenFOAM Meshing & Mesh Conversion 23 August 5, 2015 03:09
OpenFOAM 1.7.1 installation problem on OpenSUSE 11.3 flakid OpenFOAM Installation 16 December 28, 2010 09:48
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 05:26
[blockMesh] Axisymmetrical mesh Rasmus Gjesing (Gjesing) OpenFOAM Meshing & Mesh Conversion 10 April 2, 2007 15:00
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 09:56.