CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Visualization & Post-Processing (https://www.cfd-online.com/Forums/visualization/)
-   -   Exporting Point Cloud Data From ANSYS Fluent to Excel or Matlab (https://www.cfd-online.com/Forums/visualization/147486-exporting-point-cloud-data-ansys-fluent-excel-matlab.html)

Wind_Wizard January 22, 2015 10:45

Exporting Point Cloud Data From ANSYS Fluent to Excel or Matlab
 
Im doing a 2D analysis of a pin-fin heat sink and have overlaid a reactangular point grid over the flow domain in Ansys Post. I now need to export the data points with their individual temperatures to either Excel or Matlab to generate a surface plot. Is there any easy way of achieving this??

fishball February 24, 2015 02:28

Quote:

Originally Posted by Wind_Wizard (Post 528614)
Im doing a 2D analysis of a pin-fin heat sink and have overlaid a reactangular point grid over the flow domain in Ansys Post. I now need to export the data points with their individual temperatures to either Excel or Matlab to generate a surface plot. Is there any easy way of achieving this??

You could try to export the temperature with geometry information in csv format

JULIEN4d June 24, 2016 06:33

I m trying to do the same, have you suceeded in finding a soltion ?
I m currently thinking about an UDF to export the data...

sonGoku August 31, 2020 18:46

Update
 
Do you have any solution to that problem?

I have a region I marked using point cloud in ansys cfd-post, but I want to know how to export data to excel

grindingphd December 22, 2023 20:32

Reference to this link.
 
https://www.cfd-online.com/Forums/cf...tml#post862139

https://www.cfd-online.com/Forums/at...1&d=1703291140

https://www.cfd-online.com/Forums/at...1&d=1703291129


All times are GMT -4. The time now is 00:14.