Post Processing of LES simulation

likhitha · May 12, 2020, 20:16

Hello everyone,

I am trying to post-process the results obtained from the LES simulation of the wind turbine field. The flow field consists of 125 million cells and the simulation represents data for 45 minutes of real-time (i.e., T_final = 45 minutes).

I am new to the post-processing of large data, and I was looking for suggestions on the same.
How to estimate the RAM requirements for flow visualization?
Which tools/software would be optimum to handle such large data and also optimum to post-process different cases? (optimum in terms of memory and time taken to process the results)

All suggestions are welcome. Thank you in advance

Regards,
Likhitha

nick.l.thomas · August 17, 2020, 11:19

Were you able to figure this out? I've been working with some moderately large simulations and am wondering if I could be processing things more efficiently.

What are your results files stored in? .cgns, .trn, .res, etc.? How many files/timesteps did you save and how big is each file?

If you use Tecplot, their PyTecplot Python api could help automate the process depending on how your results are saved. In my case I output a bunch of .trn files for the timesteps I wanted, and processed them all individually using pyTecplot, but I'm guessing there are better ways.

May 12, 2020, 20:16	Post Processing of LES simulation	#1
likhitha New Member -- Country other than USA or Canada -- Join Date: Feb 2018 Posts: 3 Rep Power: 8	Hello everyone, I am trying to post-process the results obtained from the LES simulation of the wind turbine field. The flow field consists of 125 million cells and the simulation represents data for 45 minutes of real-time (i.e., T_final = 45 minutes). I am new to the post-processing of large data, and I was looking for suggestions on the same. How to estimate the RAM requirements for flow visualization? Which tools/software would be optimum to handle such large data and also optimum to post-process different cases? (optimum in terms of memory and time taken to process the results) All suggestions are welcome. Thank you in advance Regards, Likhitha

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transition RANS to LES during simulation	LorenzN	OpenFOAM Running, Solving & CFD	4	November 17, 2011 10:47
Ansys Post processing	ano999	ANSYS	1	May 27, 2011 16:24
NO model vs post processing in coal combustion,CFX	sakalido	CFX	1	April 15, 2011 14:07
How to conduct transient LES simulation	tianrenshui311	FLUENT	0	November 15, 2010 13:21
LES post processing	moun	FLUENT	0	April 23, 2005 10:30

August 17, 2020, 11:19		#2
nick.l.thomas New Member Nick Thomas Join Date: Sep 2018 Posts: 27 Rep Power: 7	Were you able to figure this out? I've been working with some moderately large simulations and am wondering if I could be processing things more efficiently. What are your results files stored in? .cgns, .trn, .res, etc.? How many files/timesteps did you save and how big is each file? If you use Tecplot, their PyTecplot Python api could help automate the process depending on how your results are saved. In my case I output a bunch of .trn files for the timesteps I wanted, and processed them all individually using pyTecplot, but I'm guessing there are better ways.