CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Wiki > Sutherland's law

Sutherland's law

From CFD-Wiki

Revision as of 14:16, 17 May 2007 by Jola (Talk | contribs)
Jump to: navigation, search

In 1893 William Sutherland, an Australian physicist, published a relationship between the dynamic visocity, \mu, and the absolute temperature, T, of an ideal gas. This formula, often called Sutherland's law, is based on kinetic theory of ideal gases and an idealized intermolecular-force potential. Sutherland's law is still commonly used and most often gives fairly accurate results with an error less than a few percent over a wide range of temperatures. Sutherland's law can be expressed as:

\mu = \mu_r \left( \frac{T}{T_r} \right)^{3/2}\frac{T_r + S}{T + S}
T_r is a reference temperature.
\mu_r is the viscosity at the T_r reference temperature
S is the Sutherland temperature

Some authors instead express Sutherland's law in the following form:

\mu = \frac{C_1 T^{3/2}}{T + S}

Comparing the formulas above the C_1 constant can be written as:

C_1 = \frac{\mu_r}{T_r^{3/2}}(T_r + S)
Sutherland's law coefficients
Gas \mu_0 [\frac{kg}{m s}] T_0 [K] S [K] C_1 [\frac{kg}{m s k ^ {0.5}}]
Air 17.16*10^{-6} 0 0 0

References

  • Sutherland, W. (1893), "The viscosity of gases and molecular force", Philosophical Magazine, S. 5, 36, pp. 507-531 (1893).
My wiki