CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] How can i Check 'Y PLUS' In gambit? (http://www.cfd-online.com/Forums/ansys-meshing/114493-how-can-i-check-y-plus-gambit.html)

yjs1027 March 12, 2013 04:43

How can i Check 'Y PLUS' In gambit?
 
I want to use SST k-omega model in fluent.

I usually use gambit as mesh generator.

And I want to check Y PLUS in gambit.

How can i check Y PLUS in gambit?

flotus1 March 12, 2013 05:03

Yplus is computed by the flow solver and thus not available in your meshing tool.
You will have to check the Yplus-values in fluent after a simulation.

Lance March 13, 2013 06:18

there's a way to estimate the y+, see http://www.cfd-online.com/Tools/yplus.php

yjs1027 March 13, 2013 07:27

thank you
 
thank you!

so helpful


All times are GMT -4. The time now is 02:15.