CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CD-adapco (http://www.cfd-online.com/Forums/cd-adapco/)
-   -   for O.Kaario (http://www.cfd-online.com/Forums/cd-adapco/52451-o-kaario.html)

Hassaneen August 31, 2000 05:00

for O.Kaario
 
Kaario, Are you still getting these increasing temperatures in the expansion stroke. In my case, I just got a smooth expansion stroke, every thing is going down.. the max. pressure and temp were O.K. after combustion. The only thing is I didn't apply yet the heat transfer across the cylinder wall. =Ahmed=

Ossi Kaario September 4, 2000 03:22

Re: for Ahmed
 
Ahmed,

you checked the mass averaged mean gas temperature ? In your case, is it a decreasing value all the expansion stroke ? (in my case the cylinder is not adiabatic, however) BTW, what kind of an engine do you simulate ?

Regs.,

Ossi

Hassaneen September 5, 2000 03:08

Re: for Ahmed
 
Yes the temperature is decreasing all the way during expansion after its increase at the begining of expansion due to rapid combustion. I'm simulating a conventional spark ignition engine with methane fuel. The cylinder in my case is adiabatic wall and I didn't include yet the heat transfer process.


All times are GMT -4. The time now is 20:54.