CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   gambit in fluent (http://www.cfd-online.com/Forums/fluent/31622-gambit-fluent.html)

kostas June 9, 2003 16:59

gambit in fluent
 
i have got a 2D geometry in gambit how i can insided in to the fluent 6 and i take some corollary?

Alamgir June 10, 2003 01:42

Re: gambit in fluent
 
Read manual of the fluent ... how to import the msh file to fluent.

or before going to fluent just export the mesh file.. and then in fluent FILE>READ and selet your file (remember the fluent version will be 2D)

Alamgir

lee June 20, 2003 22:42

Re: gambit in fluent
 
run fluent with: fluent 2d

read case file---> click on *.msh

kostas June 21, 2003 17:57

Re: gambit in fluent
 
thanck you

nikita July 3, 2003 23:12

Re: gambit in fluent
 
after you do your meshing..then go to FILE-EXPORT-MESH.After that you open fluent then FILE-READ-CASE-then find your.msh file...good luck

Patel Amit R. July 10, 2003 06:01

Re: gambit in fluent
 
Sir:

For my research topic i have created jeometry in the Pro-E and exported the same in GAMBIT. i see help fromsome one to guide me further.

amit r patel


All times are GMT -4. The time now is 22:50.