DISPLAY ERROR!!
Hi,
I am using a combination of "Hummingbird Connectivity" and "SSH secure shell" to run fluent through the local UNIX machines at my university. Gambit works fine without any display problems. However, when I try to open display window in Fluent, I get the following error message: "Error message from graphics function how_Device_Info: Server does not have GLX extension." If you have encountered similar problem before, will you kindly suggest a remedial measure. Many Thanks, Alex |
Re: DISPLAY ERROR!!
Try starting fluent as follows:
fluent -driver x11 |
No :(
Thank you Erwin, but you suggestion didn't do the trick.
Again, thanks, Alex |
Re: DISPLAY ERROR!!
What versions of the above software do you have?
I have tried it running fluent via ssh and both Hummingbird eXceed 7.1 and cygwin/XFree86 and it works fine with both. What do you get if you run xdpyinfo after you have connected to the unix machine. It should give you a list of the server extensions that are available on your X server. Fluent doesn't need the GLX extension (which is not part of eXceed) but will use it if it's there. (which it is with cygwin/XFree86) |
Thank you Rob!
Hi Rob,
Thank you so very much for educating me about the source of the error. Though I still haven't solved the problem, knowing what is causing it makes me feel much better. I have answered your questions regarding versions of progammes used (see below). I would be delighted if you can come up with a way to circumvent this problem. In any case, I am very thankful for what you have done. Alex Hummingbird Exceed: Ver. 7.1.1.0 SSH Secure Shell: 3.1.0 [Build 235] Fluent: Release:6.1.22 Graphics Version: 7.07-1 List of extensions include: BIG-REQUESTS DOUBLE-BUFFER Extended-Visual-Information HCL-DOS-Access HCLMISC HCLxperf LBX SECURITY SHAPE TOG-CUP XC-APPGROUP XC-MISC XInputExtension |
All times are GMT -4. The time now is 14:43. |