CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   applying results as b.c on some other model (http://www.cfd-online.com/Forums/fluent/38174-applying-results-b-c-some-other-model.html)

manohar October 10, 2005 02:16

applying results as b.c on some other model
 
can anybody help me, is this possible to apply results from one case to the other case as b.c (e.g. temp)?

RoM October 10, 2005 03:39

Re: applying results as b.c on some other model
 
Use file->write profile to export profiles on boundaries and use file->read profile ro read it into your new case. The profile will then become available as a boundary condition.

RoM

manohar October 10, 2005 06:36

Re: applying results as b.c on some other model
 
thank u very much, thankalot. its fine. that means, from this we can get any value, is it?

RoM October 10, 2005 07:03

Re: applying results as b.c on some other model
 
I have used it for temperature, velocity and turbulence (k-e). I think it will work for all the values that you can export.

RoM


All times are GMT -4. The time now is 14:30.