temperature limited to 5.000e+03 ?
Hello
I am simulating h2/o2 combustion in a diffusing flame using Eddy Dissipation ( h2+0.5o2=h2o) the problem is very sensitive to "initial conisitons", but every time the message "temperature is limited to 5.000e+03" appears after some interations while converging. 1- what does the message means really ? 2- if the convergence is achieved, the message will affect the final solution ? thank you for your help |
Re: temperature limited to 5.000e+03 ?
Find the cells where the temperature is so high and try to refine the mesh ...
|
Re: temperature limited to 5.000e+03 ?
Please check the enthalpies of the components. The maximum temperature can not be higher than adiabatic flame temperature.
|
All times are GMT -4. The time now is 20:06. |