CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Lift coefficient Plot for turbine blade- Reg (http://www.cfd-online.com/Forums/fluent/41424-lift-coefficient-plot-turbine-blade-reg.html)

Mahendran.M June 19, 2006 03:17

Lift coefficient Plot for turbine blade- Reg
 
Hi

I want to plot the lift coefficient over a turbine blade surface. I need help on the above matter.

Thanking you


Fabrice June 19, 2006 21:25

Re: Lift coefficient Plot for turbine blade- Reg
 
Hi,

You can do as followed:

solve->monitor->force.

Tick "plot" if you want to plot the result during the calculation, tick "write" if you want to save a file.

Be aware of setting the reference values (Report->reference values) otherwise your results will be completely wrong!!

Regards,

Fabrice.

Mahendran.M June 19, 2006 22:43

Re: Lift coefficient Plot for turbine blade- Reg
 
Dear Fabrice

Thanks for you reply.But I don't want to monitor the lift force on the surface.I want to draw a lift coefficient plot from Blade leading edge to trailing edge on pressure surface.

Thanking you


All times are GMT -4. The time now is 07:20.