CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Dynamic meshing-In-cylinder model (http://www.cfd-online.com/Forums/fluent/48338-dynamic-meshing-cylinder-model.html)

Mary May 26, 2008 09:44

Dynamic meshing-In-cylinder model
 
Hi, I am trying to simulate a piston with the in-cylinder model, but after i load the mesh in fluent it is not available this option, I cannot select it. ¿What could be the problem?.. Thanks.

Raghu May 26, 2008 23:12

Re: Dynamic meshing-In-cylinder model
 
Hi Friend,

I too have faced same kind of problem some times..... For that i have started my analysis from first calling the mesh file then enble the energy equation first then the dynamic mesh option will be highlighted.....

With regards, Raghu

renzo May 28, 2008 08:15

Re: Dynamic meshing-In-cylinder model
 
If you want to use the in-cylinder model, you must first switch the solver to unsteady.

Renzo


All times are GMT -4. The time now is 21:53.