CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

Dynamic meshing-In-cylinder model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   May 26, 2008, 09:44
Default Dynamic meshing-In-cylinder model
Posts: n/a
Hi, I am trying to simulate a piston with the in-cylinder model, but after i load the mesh in fluent it is not available this option, I cannot select it. ¿What could be the problem?.. Thanks.
  Reply With Quote

Old   May 26, 2008, 23:12
Default Re: Dynamic meshing-In-cylinder model
Posts: n/a
Hi Friend,

I too have faced same kind of problem some times..... For that i have started my analysis from first calling the mesh file then enble the energy equation first then the dynamic mesh option will be highlighted.....

With regards, Raghu
  Reply With Quote

Old   May 28, 2008, 08:15
Default Re: Dynamic meshing-In-cylinder model
Posts: n/a
If you want to use the in-cylinder model, you must first switch the solver to unsteady.

  Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
dynamic mesh prob inside the cylinder kantharao FLUENT 0 May 30, 2008 06:36
No-constant dynamic layer in-cylinder Mary FLUENT 1 May 29, 2008 15:02
Dynamic Mesh - Ball in Cylinder Hamish FLUENT 5 October 26, 2007 08:43
Dynamic Mesh in an In-cylinder case venkitaraman FLUENT 0 March 26, 2007 17:15
dynamic mesh for oscillating cylinder gaetan FLUENT 0 October 20, 2006 11:47

All times are GMT -4. The time now is 07:35.