CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Grid seen in contour plots (http://www.cfd-online.com/Forums/fluent/83179-grid-seen-contour-plots.html)

swati_mohanty December 18, 2010 08:21

Grid seen in contour plots
 
When I display a 2D contour plot for the interior with "filled" option and without "draw grid" , I get a contour plot with colored mesh which is not filled. could anybody help.

Thanx

Sm

skris2009 December 18, 2010 13:02

Hi,

When you display contours in 2D, by default (with no surface selected), the contours are displayed on the 'default interior' surface.

So, deselect 'default interior' surface, and you should be able to see just the contours, without the mesh. Same goes for vector, pathlines display too.

Hope this helps.

swati_mohanty December 23, 2010 08:37

Thanx Soumya, had forgotten this since I am doing 2d simulation after a long gap.
sm

gfoam August 14, 2013 12:06

Thanks, this served to me a lot


All times are GMT -4. The time now is 14:23.