CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   OpenFOAM Native Meshers: blockMesh (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/)
-   -   Uniform prism cells with blockMesh (http://www.cfd-online.com/Forums/openfoam-meshing-blockmesh/107171-uniform-prism-cells-blockmesh.html)

keepfit September 19, 2012 10:49

Uniform prism cells with blockMesh
 
2 Attachment(s)
Hello, OpenFoamers,

I was wondering, is it possible to generate a uniform prism (see the 2nd figure)?

Please take a look at the attached files.

First prism is created by blockmesh, in which the cells are obvious skew, and have large aspect ratio on top; especially when the number of cells is increasing.
Second prism with uniform cells is what i want.

Regards,
Daivd

wyldckat April 5, 2014 18:59

For future reference, this topic has been discussed here: http://www.cfd-online.com/Forums/ope...tml#post483293 - post #4 and onwards.


All times are GMT -4. The time now is 11:30.