About gas generates
Is this right to set the gas generating rate to 2.402400E-07(kg/m**3.S) and need no other setting? It is in a packed vessel.
PATCH (SOR ,VOLUME,3,0,0,0,0,0,1,1) COVAL (SOR ,P1 , FIXFLU , 2.402400E-07) |
Re: About gas generates
This will set a mass influx of 2.402400E-07 * Volume of the vessel.
Either change the patch type to CELL (which =1) or change the rate to 2.402400E-07/(VOLUME) In The RESULT file under Nett sources you should see the mass flux which is entering the domain...Nett source for P1, in kg/s. |
All times are GMT -4. The time now is 23:13. |